Commercial garage door repair in Fort Myers
A bay door that won't close leaves the building open overnight, and one that won't open keeps the trucks outside. Send a photo of the door and the maker's label to (239) 990-3754, and you'll know whether it's a door we service before anyone drives over.
- On site: 1 to 3 hours for most repairs
- License CGC15***68
Bay door trouble, and where it usually starts
- The door stops halfway or reverses on the way down: often the safety eyes or the opener's limit setting.
- A forklift or a box truck clipped the door, and a section is bent or out of its track.
- The opener hums, trips its breaker or gets slower every week: time to look at the operator.
- A cable is frayed at the bottom bracket, or the door sits crooked, lower at one corner.
- The door is loud, jerks on the way up, or barely moves by hand during a power outage.
Sectional doors in bays and storefronts
A lot of the commercial doors around Fort Myers are steel sectional doors: warehouse and flex bays off Metro Parkway, auto shops and showrooms along Colonial Boulevard, service doors on Palm Beach Boulevard. They run on the same parts as a house door, only bigger: track, rollers, hinges, cables, drums and springs. We check the balance by hand first, because a door that's out of balance wears out every opener you put on it. Then we fix what's actually worn.
Openers that work a full shift
A door that cycles all day needs an operator built for commercial duty, and a house opener on that door wears out fast. We repair the operator that's there, and if it's undersized for the traffic, we tell you, so you can plan the change instead of finding out on a busy morning.
After a hit, and before the next one
Forklifts and trucks win against doors. After an impact we take the door out of service, replace or straighten the damaged section, and check the track, the hinges and the anchors before it runs again. If you manage several buildings, ask us whether a scheduled visit makes sense for your doors.
Questions about commercial garage doors
Steel sectional doors in warehouses, shops and service bays, the openers that run them, and roll-up doors. For a fire-rated door or loading dock equipment, send a photo of it and its label first; if it's outside what we do, we say so.
Most commercial repairs take 1 to 3 hours on site. If a bent section needs a replacement from the maker, we leave the door closed and safe when the damage allows it, then come back to install the part.
Yes. Someone answers calls and texts 24/7, and when the repair can wait for your hours, we set the visit around them.
Send the address, a photo of the door and its label, and who has the key or the gate code. The written price reaches you before any work starts, even if you're across town.
Tell us what the door is doing
A person answers, day or night. Describe the door or text a photo, and you'll hear what it probably is, how long the fix takes and when a truck can get to you.